The SQL processor evaluates the SQL queries and commands submitted to Sclera. The evaluation is done by translating them to subcommands/subqueries that are executed in turn on the underlying database system where the data actually resides.
The challenge is to coordinate the multiple database systems in such a way that the end user is not aware of the heterogeneity, getting an experience no different from working on a single system with all the data and the analytics capabilities built in.
The query processor is responsible for compiling and evaluating the input query, broadly following the following steps:
The query is parsed into an operator plan. This plan contains the details of the base data and the relational operations to be performed on that data to get the final result.
The data source can be a table in a linked datastore, or a text or CSV file on the disk, or a web service. The operations can be standard relational operators (e.g. filters, project, join, group-by aggregation), or extension operators (e.g. classification, clustering, entity extraction).
A query optimizer rewrites the plan by reordering the operations to make it more efficient.
For instance, the optimizer pushes down evaluation of relational operators to the underlying data sources the extent possible. Relational operators on base tables in a datastore are marked to be executed on that datastore as a part of fetching the data. This is more efficient than fetching just the base data and evaluating the operators externally.
Finally, the query processor evaluates the optimized plan. This is done in two steps.
First, the operator plan is converted to an evaluation plan; this replaces the operators with (a) evaluation operators (to be executed by Sclera’s streaming evaluation engine) (b) expression evaluators, which are converted into queries and evaluated on an underlying system, or (c) materializers, which materialize a stream or an expression into a (temporary) table on an underlying system.
Second, the evaluation plan is evaluated in a pipeline and the result is passed to the consumer via the appropriate interface (JDBC library or command line shell).
Let us consider single-input relational operators first. If the input to the relational operator is already present in a datastore, the operator is evaluated as a part of the query that fetches the data. Otherwise, the operator is evaluated by Sclera’s streaming evaluation engine – the only exception is the sort operator, in which case the input is materialized in the cache store and sorted as a part of the query that fetches the result.
Planning of multi-input operators is more involved. We take the example of
Recall that comma-separated
from_items appear in the
FROM clause are converted into a sequence of binary cross-products, which may later be converted into binary joins based on the predicates in the
WHERE clause. In this section, we only consider planning of a join with two inputs.
The inputs to the join are planned recursively; after planning, each input is either an expression that is to be pushed down to an underlying system as a query for evaluation, or a data stream that is the either the result of prior in-memory computations, or ingested from an external source. Further, we assume if an input is a data stream, it is the left input – if the left input is not a data stream, but the right input is, the join is rewritten to commute its inputs.
There are multiple cases:
Case 1: Both inputs are data streams, the join is an inner or outer equi-join, and the input streams are sorted on the respective joining columns
Sclera evaluates the join in its embedded engine using the merge-join algorithm.
Case 2A: Left input is data stream, the join is an inner or outer equi-join, and the left input stream is sorted on its joining column
The right input is evaluated with an
ORDER BY on its joining column. This case then reduces to the Case 1 above and is evaluated accordingly.
Case 2B: Left input is data stream, the join is an inner or left-outer equi-join, and the left input stream is not sorted on its joining column
The right input is materialized at source location (if not a base table), and indexed on its joining column. The left input is processed in batches, and each batch probes for the joining right-input rows using the index. This is an indexed nested loop join with the left input in the outer loop.
This evaluation strategy is chosen to avoid materializing the left input, which is assumed to be expensive (or impossible) to materialize. Note that a right-outer join cannot be evaluated using this strategy.
Case 2C: Left input is data stream, but scenario not covered by the cases above
The left input is materialized at the location of the right input (or the cache store if the right input is a stream). If right input is a stream, it is also materialized at the cache store. This reduces to the Case 3A below.
This the most inefficient scenario, but we think it is rare. Nevertheless, please be careful when joining streams without the appropriate sort order, especially when the join is a right-outer join.
Case 3A: Neither input is a data stream, and both inputs are present at the same location
In this case, the join expression is pushed down to the common location, and is computed by the underlying system.
Case 3B: Neither input is a data stream, and the inputs are present at different locations
This is a cross-system join. To evaluate a cross-system join, Sclera needs all the inputs to be present at a single location; let us call this the “target location” for the join. This target location is decided as follows:
FROMclause. The list may contain duplicates.
The ordering of the
from_items in a
FROM clause thus matters when evaluating cross-system joins. While this enables you to control how data is moved while evaluating a query, you need to pay special attention to this ordering – especially when significant amounts of data needs to be transfered.
Specifically, when specifying a join between a relational database and HBase, if large amount of data in HBase is expected to be involved in the join, then you should place the HBase source leftmost in the
FROM list; this will ensure that HBase is picked as the target location in the join.
In any case, when evaluating a query with a cross-system join, please take a close look at the query’s evaluation plan (obtained using the
EXPLAIN shell command) before submitting the query.
In the current version, Sclera moves data from a “source” to a “target” database system by reading in the data from the source and inserting it into a temporary table in the target. This transfer is done in a streaming (pipelined) manner wherever possible, to avoid reading the entire result in memory. This could be a bottleneck when large amounts of data (millions of rows) are transferred. More efficient data transfer mechanisms will be in place in later versions of Sclera.
These operators are evaluated using external libraries available through a component.
If the input is not already available in memory (entirely, or as a stream/iterator from a datastore), it is fetched using the datastore’s interface (e.g. JDBC/SQL for a RDBMS). The component then passes the input to the associated library (after appropriate transformations, if needed); the operator’s result is then computed using the library’s API.
An operator could be evaluated using multiple alternative components. For instance, the “classification” operator could be evaluated using WEKA (component:
sclera-weka) or using Apache Mahout (component:
sclera-mahout). The specific library/component used can be enforced by the query, or through defaults in the configuration. See the SQL documentation for details.
Note that the way the input is prepared and/or the result is obtained could be very different for different libraries. Without Sclera, moving from one library to an alternative library with similar functionality would be a messy “porting” job. With Sclera, all that complexity is taken care of under the hood.
The command processor is responsible for executing the non-query commands, such as creating tables, inserting, updating and deleting data.
A command may or may not have an embedded query. If it does, Sclera makes use of the query processor discussed above to plan and execute the query, and translates the statement to work with the final result (details left out for brevity).
In either case, Sclera interfaces with the underlying systems’ APIs to get the task done. For instance, to create a table when the underlying system is Apache HBase, Sclera makes use the appropriate API functions to create the structure. Similar translation happens when inserting, updating or deleting rows, and so on.
The schema store contains the metadata that enables the SQL processor to plan the SQL statements for execution on the underlying systems. This metadata includes:
The cache store is used by the query processor for evaluationg relational operators on intermediate results. By default, an embedded H2 main-memory database is used as a cache data store. This default can be changed by modifying the configuration.